Fuel Saving Tips
REDUCE YOUR CARBON FOOTPRINT AND OPTIMIZE FUEL ECONOMY WITH THESE DRIVING TIPS
Fuel Savings From Your Right Foot
Heed the speed limit and save! Most cars, vans, SUVs and pick-up trucks operate most fuel-efficient when travelling between 50 and 80 km/h. Above this optimal speed zone, vehicles consume increasingly more fuel the faster they go.
At 120 km/h, a vehicle uses about 20 percent more fuel than at 100 km/h. On a 25-km trip, this spike in speed-and fuel consumption-would cut just two minutes from your travel time. Consider too that high-speed driving is less safe because people behind the wheel do not have adequate time to respond to hazardous situations.
For example, if it takes ten dollars worth of fuel to drive a certain distance at 100 km/h, it would cost 12 dollars to travel that same distance at 120 km/h. That is like throwing a toonie out the window every 100 km.
Plan your manoeuvres well in advance to maintain your vehicle's momentum. Read the road ahead, anticipate road disruptions, monitor the movements of pedestrians and other vehicles, and keep a comfortable distance between your vehicle and the one in front of you. These driving techniques will enable you to keep your speed as steady as possible and avoid unnecessary fuel consumption and safety risks.
Safety always comes first. Slow down in construction zones and when the weather is bad, and stop fully at stop signs and red lights. You're on a journey to save money and the environment; make sure you live to enjoy the adventure.
The harder you accelerate the more fuel you consume. In the city, you can conserve fuel by easing onto the accelerator pedal gently and gradually.
To maximize your fuel efficiency, take five seconds to accelerate your vehicle up to 20 kilometres per hour from a stop.
Just imagine that there's an egg under your pedal and an open cup of coffee on your dashboard. Be careful not to break the shell or spill the drink! If you're driving a gasoline fuelled vehicle with a manual transmission, use a moderate throttle position and shift between 2,000 and 2,500 RPM.
Coast to Decelerate
As a driver, you often need to apply your brakes to bring your vehicle to a complete stop. However, by anticipating traffic slowdowns as early as possible, you can decrease your speed, conserve fuel and save money by simply taking your foot off the accelerator.
Today, most vehicles are equipped with fuel-injection systems that automatically shut off the flow of fuel to the engine when the accelerator is fully released. In this mode, the decelerating vehicle can be thought of as coasting and using no fuel. When the engine speed drops to idle, the injection system restarts the flow of fuel to ensure that the engine doesn't stall.
Coasting to decelerate also reduces wear and tear on your tires and brakes, which in turn reduces your maintenance, repair, and servicing costs.
For additional fuel-saving tips please visit this helpful link- https://www.nrcan.gc.ca/energy/transportation/personal/7469
Has your vehicle ever had a Fuel Injection Service? Click Here to find out what happens in your engine without you knowing it.